68 small oil expeller

Oil Expeller Machine

The YZS-160 oil expeller machine specializes in the extraction of various kinds of raw materials such as jatropha seeds, sunflower seeds, peanut seeds, hulled sesame seeds, rape seeds, canola seeds, cotton seeds etc. The feeding hopper of YZS series oil press is open type with rotating plate pushing the material into expeller housing. The YZS-160 oil press is suitable for application in middle or small oil plant. It is also popularized in the personals home use. The YZS-160 can be used as pre-press expeller in oil extraction plant.


YZS-68 Oil Expeller Press
68 oil press hot sell
FAQs - Oil Expeller Machine
How to choose oil press
Now the oil press can be used for general processing of soybean, peanut,sesame, rapeseed, cottonseed, sunflower seeds, olives and other particles and also can be used for ricebran, corn germ powder, such as oil and safflower oil, and other few wild plants of oil-bearing materials.
How to use oil press
Before using the oil presses, first of all should be ready for all of assistant devices and containers, check and adjust the degree of tightness of belts. And then start up the motor so that the machine run empty of material around 15 min, checking the rotate speed of screw pressing worm. The general speed should be around 33 minutes.
How to store oil
Oils that are high with monounsaturated fat will keep up to a year, while refined olive oil, which has the highest of monounsaturated fat, can last a few years. Extra virgin and virgin olive oils will keep about a year after opened. The shelf life of most other oils after opened is usually six-eight months. Do not store oil in that pretty jar in the kitchen window or keep it on the shelf next to the stove.

Oil Expeller Machine

YZS-160 oil expeller machine is an advanced oil expeller, it is features by its simple design, easy operation, wide suitability and continuous operation, high productivity and high oil output rate. Besides, this oil expeller machine can be applied for various oil seeds and depending on oil content of the particular crop you are pressing, the machine will extract 90-95% of it. So for canola and sunflowers, you will get about 300kgs per ton. Soybeans yield are about half and the remaining cake is worth more for animal feed.


Specifications of the YZS-160 Oil Expeller Machine

oil expeller machine * Capacity: 14-17T per 24Hours
* Power: 22kW/3-phase/1440rpm
* Weight: 1000kg
* Size: 2020 x 700 x 780mm


Operation of the YZS-160 Oil Expeller Machine

The operation of screw oil press is based on the axial movement of the material in the oil expeller machine. 7.5 to 30 hp electric motor was used to power the machine. The electrical heating circles are connected to electricity controlled by electrical cabinet and switch on to heat the expeller chamber to increase the temperature of seeds in housing for higher oil extraction rate. Then the oil seeds are fed from the hopper to the expeller chamber pushed by the worm shaft which rotates continuously. When the electric motor is switch on, the main shaft and the auger, which moves and packs the seed being heated along the expeller chamber to the far side, will start to rotate. The compression is achieved by decreasing pitch of the auger, designed to act as a screw press. The conditioned seeds are compressed and the oil content forced out through the slots on the chamber. The heating of the seed and high pressure generated at expeller chamber due to drastic reduction in volume, ensured expelling of the oil contents.